Marina del Sol de Estepona SA  

          Tel: (34) 952 794069 - 802643 Fax: (34) 952 802556        

Entrega Rápida                   email: mail@jabsco-rule.com                     Entrega Rápida

 

            Inicio        Recambios                      

 

 

 

Accessories

 

       

Solenoid valve for electric toilet 37010

Where 37010 series electric toilets are installed below the waterline we recommend installing a loop on the inlet plumbing rising at least 8" (20cm) above the highest ( static or heeled) waterline level, and installing a vented loop fitting at the top of the loop to stop water siphoning over the loop and flooding the vessel. the extra suction generated by 37010 series electric toilets will open the valve in vented loops, drawing in air and preventing priming. the 37068-0000 solenoid vlave attaches directly to jabsco vented loops and is wired to the toilet's on/off switch. it closes whenever the toilet pump is operated and ensures full pump priming.

for use with; 29015-0000 3/4" (19mm) vented loop recommended accessory 29295-0011 3/4"  (19mm)  inlet return valve.

 

 

 

 VALVULA AIRE INODORO (37010)

89.47€  IVA inc

 

 37068-2000

 

           vented loops

An essential safety component on all inlet and discharge plumbing of toilets installed below the static or heeled waterline. simple valve system ensures water cannot syphon over plumbing loops. available in three sizes for 1 1/2" (38mm) 1" (25mm) and 3/4" (19mm) ID hose, internal valve avoids the need for external venting.

 

 

CODO INODORO 3/4"  

40.91€  IVA inc

 29015-0000

CODO INODORO 1"  

58.69€  IVA inc

 29015-0010

CODO INODORO 1-1/2"  

71.16€  IVA inc

 29015-0020

 

 Y valve

Robust  Y- valve for use in toilet applications. allows waste to be pumped overboard or into a holding tank. rotating ports allow for variable routing of hoses onto the valve, can be operated through bulkhead by use of optional handle extension, can be padlocked so that waste can only go to the holding tank to comply with some local regulations  (padlock not included) waste and corrosion resistant construction throughout, fittings; connections for both 1 1/2"  (38mm) ports and 1" (25mm) inlet port.   

 

 

Y VALVULA  

108.26€  IVA inc

 

 45490-1000 

HANDLE EXTENSION (45490)  

14.12€  IVA inc

 

 45500-1000 

 

 Pumpgard™

The pumpguard protects manual or electric toilets from pump malfunctions caused by debris. simply installedin 3/4" (19mm) ID inlet hose. Transparent housing alllows instant inspection , screw off top allows quick in place cleaning and removal of debris. fittings; connections for 3/4"(19mm) ID hose.      

 

 

FILTRO 19mm 0.75" ESPIGA  

24.45€  IVA inc

 

46200-0000 

 

Inlet non-return Valve

A check valve gives quicker and easier flushing response on many manual and 37010- series electric toilet installations, for use with manual and electric toilets using sea water flush, simply fit in inlet suction hose, near seacock but just above waterline, prevents loss of prime in above waterline installations, retains water in bowl of 37010-series electric toilets installed above waterline. fittings; connections for 3/4"(19mm) ID hose.

 

 

VALVULA ANTIRRETORNO 19mm (3/4")

27.39€  IVA inc

 

 29295-1011 

VALVULA ANTIRRETORNO AMAZON NRV 25mm (1")

27.39€  IVA inc

 

 29295-1000 

VALVULA ANTIRETORNO 38mm (1 1/2")

27.39€  IVA inc

 

 29295-1010 

 

 

Marina del Sol de Estepona SA

Marina del Sol de Estepona SA  

          Tel: (34) 952 794069 - 802643 Fax: (34) 952 802556        

Entrega Rápida                   email: mail@jabsco-rule.com                     Entrega Rápida

 

            Inicio        Recambios