Home  Directory

Jabsco - Rule

Back

Home

 

Cart

Espaņol

Email

Ventilation Blower

Jabsco DC Blowers are designed to remove fumes from the engine compartments of gasoline powered boats prior to start-up, and therefore conform to ISO 8846 MARINE and USCG Regulations for ignition protection. They are listed as N.M.M.A. type accepted and comply with ISO 9097 MARINE and are CE marked. AC models are not ignition protected. Jabsco Blowers can also be used for air intake or extraction in galleys, bilges, accommodation and head compartments. Only the heavy-duty blowers are designed for continuous duty operation in commercial or heavy use applications. Blowers should not be installed close to sources of direct heat exceeding 180°F (55°C)

Flangemount Blowers

Flangemount Blowers are of a radial design, which gives the highest output in more complex installations with longer ducting lengths and/or multiple bends in the ducting. They are generally mounted directly onto a flat bulkhead using a mounting collar to connect to the discharge ducting. This allows a very neat installation on an engine room bulk head.

Flangemount Blowers

Heavy-Duty Flangemount Blowers

 

Flexmount Blowers

Flexmount Blowers are also of radial design, but are installed by attaching a mounting collar (supplied with the blower) around the motor to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Both ports are designed for slip-on flexible ducting connections.

Flexmount Blowers

Heavy-Duty Flexmount Blowers

 

Marina del Sol de Estepona SA

 

 

Back

Marina del Sol de Estepona SA

Plaza del Levante 35/37

Puerto Deportivo, Estepona

29680, Malaga, Espaņa

Tel: (34) 952 802643 - 794069